对苯二甲酸-铕-钇配合物的合成及荧光性质

以对苯二甲酸(H2L)为配体,合成了系列(Eu1-xYx)2L3.3H2O固体粉末配合物.通过元素分析、紫外吸收光谱、X射线衍射和红外光谱确定了配合物的组成和结构,并通过荧光光谱研究了它们的荧光性质.结果表明钇掺入配合物后,能增强Eu3+的特征荧光,当铕与钇的摩尔比为0.05∶0.95时荧光强度最强.     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

无溶剂研磨条件下四氢苯并吡喃衍生物的一锅法合成

四氢苯并吡喃衍生物在药物和农药研究中有着广泛的用途. 基于合成这类化合物的传统方法所用溶剂多为对环境不利的极性溶剂, 且合成需分步进行, 在提倡绿色化学和发展节约型经济的今天, 如何改良这类反应已成为一个热点. 本工作通过选择不同的碱尝试反应最佳条件, 发现用价廉易得的碳酸钾为碱, 对不同官能团取代的底物芳醛采用研磨的手段, 在无溶剂条件下, 一锅法可成功合成四氢苯并吡喃衍生物. 该法条件温和, 收率高, 易于操作, 对环境影响小.     

甲基丙烯酸三苯墓甲酯和甲基丙烯酸酯类的共聚物在溶液中的螺旋诱导和解旋作用

甲基丙烯酸三苯墓甲酯和甲基丙烯酸酯类的共聚物在溶液中的螺旋诱导和解旋作用陈传福，刘卫宏，陈永明，任长玉，习复（中国科学院化学研究所北京１０００８０）关键词甲基丙烯酸三苯基甲酯，甲基丙烯酸甲酯，光学活性，螺旋诱导，解旋在手性阴离子复合引发剂存在下，甲基...     

On the Criteria of Instability for Electrochemical Systems

Both cyclic-voltammetry-based and impedance-based experimental criteria that have been developed recently for the oscillatory electrochemical systems are critically appraised with two typical categories of oscillators.Consistent conclusions can be drawn by the two criteria for the category of oscillators that involve the coupling of charge transfer mainly with surface steps(e.g.ad-and desorption)such as in the electrooxidation of C1 organic molecules.Whereas,impedance-based criterion is not applicable to the category of oscillators that involve the coupling of charge transfer mainly with mass transfer(e.g.diffusion and convection) such as in the Fe(CN)6^3- reduction accompanying periodic hydrogen evolution.The reason is that the negative impedance cannot include the feedback information of convection mass transfer induced by the hydrogen evolution.However,both positive and negative nonlinear feedbacks,i.e., the diffusion-limited depletion and convection-enhanced replenishment of the Fe(CN)6^3- surface concentration,that coexist between the bistability,i.e.,Fe(CN)6^3- reduction with and without hydrogen evolution at lower and higher potential sides respectively,are all reflected in the crossed cyclic voltammogram(CCV).It can be concluded that the voltammetry-based criterion(in time domain)is more intuitive,less time-consuming and has a wider range of applications than the impedancebased one (in frequency domain).     

钛配合物Cp2TiL，Cp2Ti2Cl2(μ-O)和Cp4Ti4Cl4(μ-O)4的合成与晶体结构研究(Cp=η5-C5H5，L=2，6-吡啶二羧酸盐)

利用溶剂热的方法将Cp₂TiCl₂(Cp=η⁵-C₅H₅)与2，6-吡啶二羧酸钠(L)反应，不同的反应时间得到了2个具有不同晶体空间群的化合物Cp₂TiL(1a和1b)，而在常温或低温下，Cp₂TiCl₂或CpTiCl₃同羧酸盐或亚胺反应却得到了双核或四核氧桥联的钛化合物。     

考虑残值变化和消费者低碳偏好的生产定价与销售激励机制

在消费者低碳偏好和产品残值变化下,研究制造商的碳减排、生产及定价联合决策、以及对销售商的销售激励契约设计问题。不同于以往的研究假设残值不变,本文考虑残值依赖于清仓期库存以及碳减排问题。提出委托代理模型,求解模型并从理论上分析残值的变化和碳减排成本对双方决策和收益的影响。研究表明,残值变化率的增加只导致制造商的收益和生产量下降,不影响制造商的碳减排、定价、销售契约及零售商的决策和收益,但碳减排成本将导致制造商的收益和双方决策变量的下降。最后通过算例分析验证了结论,对供应链的运营实践有指导意义。     

Distribution of δD in 25-cm Surface Snow Along Trans-Antarctic Route (Ⅱ)——The “1990 International Trans-Antarctic Expedition” Glaciological Research

On the way of the "1990 International Trans-Antarctic Expedition", the first author of this paper, the Chinese member of the expedition, collected 104 snow samples in 25-cm surface snow along a 5986-km route on Antarctic ice sheet from west to east. The geographical distribution of δD across the Antarctica by the longest route is obtained from stable isotope analysis for the first time. After discussing regional differences of physical geographic conditions, maritime-continental influence, altitudes and latitudes at sampling sites, the distribution of δD is considered to have a close relation to latitudes, but the topographic effect is prominent in some particular regions. The mean annual temperature at sampling site and its relationship with δD in surface snow covering Antarctica from west to east are discussed also. The δD-temperature gradient from the south end of Antarctic Peninsula to Vostok obtained in this paper is very close to that in Terre Adelie Land obtained by predecessors. The snow-dri     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

正庚烷在超稳Y沸石(USY)负载超强酸催化剂上加氢异构化

The Pt-bearing SO₄^2-/ZrO₂ superacid catalysts supported on ultra stable Y (USY) zeolite were prepared by impregnation and characterized by X-ray diffraction, nitrogen adsorption and Hammett indicators. Their catalytic activities were evaluated in the hydroisomerization of n-heptane with an atmospheric fixed-bed reactor. The catalysts possessed a high surface area, superacidity and well maintained pore structure of USY support. The supported catalysts with a suitable SO₄^2-/ZrO₂ loading exhibited a higher catalytic activity and selectivity than the unsupported SO₄^2-/ZrO₂ catalyst or the Pt supported on USY catalyst without superacid. At the reaction temperature of 220 ℃, over the catalyst with a Pt loading of 0.8wt% and ZrO₂ loading of 10wt%, the conversion of n-heptane could be as high as 35.2% with a selectivity of 87.9% for isomerization products.